Supermicro X9, X10, X11 series made before November 2019 server (and equivalent H-series)

For Supermicro X9, X10, X11 series (and equivalent H-series) servers, there is just one operation to perform:

Factory reset IPMI

Factory reset IPMI:

Log into the IPMI web UI with default username ADMIN and default password ADMIN
- If ADMIN/ADMIN does not work for you, neither will it work for us. Plenty of documentation on “how to reset supermicro ipmi password” can be found with your preferred search engine.
Navigate to Maintenance -> Factory Default
Click Restore
Click Ok on the warning box that pops up
Click Ok on the message box stating to wait 1 minute
Wait at least 1 minute

That completes setup of your Supermicro X9, X10, X11 series made before November 2019 server (and equivalent H-series) prior to shipping to a Dedicated.com datacenter. We look forward to receiving and racking your server!

If you are unable to complete any of these steps, or they do not match your server, or any other problem, please reach out to let us know before shipping as we would much rather assist you with configuring your server properly, versus receiving an improperly configured server that we then need to configure upon arrival on site, which will result in remote hands fees being levied.